NEAX2000 ISDN Primary Rate Interface Specification

The NEAX2000 ISDN Primary Rate Interface Specification consists of the following manuals:

NEAX 2000 IPS ISDN System Manual

This manual describes the hardware installation and programming procedure for the Integrated Service Digital Network (ISDN) on the NEAX 2000 IPS System.

This manual consists of five chapters:

CHAPTER 1 GENERAL INFORMATION

This chapter explains the ISDN system outline, the equipment name and function, system specifications, capacity and conditions.

CHAPTER 2 INSTALLATION

This chapter explains the hardware installation procedure to provide ISDN interface to the PBX.

CHAPTER 3 SYSTEM DATA PROGRAMMING

This chapter explains the programming procedure to provide the ISDN feature to the PBX.

CHAPTER 4 CIRCUIT CARD INFORMATION

This chapter explains the mounting location, the meaning of lamp indications, and the switch settings of each ISDN circuit card.

CHAPTER 5 OPERATION TEST

This chapter explains the operation test to be performed after you completed the installation of ISDN. For fault diagnosis by MAT or CAT, refer to the Maintenance Manual.

ISDN/Q-SIG Features and Specifications

This manual describes the features of the Q-SIG System on the NEAX 2000 IPS System.

ISDN/Q-SIG Features and Specifications

This manual describes the hardware installation and programming procedure for the Q-SIG System on the NEAX 2000 IPS System.

This manual consists of 4 chapters.

CHAPTER 1 GENERAL INFORMATION

This chapter explains the Q-SIG system outline, system configuration, the name and functions of circuit cards required, system capacity, system conditions, and available service features.

CHAPTER 2 INSTALLATION

This chapter explains the hardware installation procedure to provide Q-SIG interface on the PBX.

CHAPTER 3 SYSTEM DATA PROGRAMMING

This chapter explains the programming procedure to provide Q-SIG feature on the PBX.

CHAPTER 4 CIRCUIT CARD INFORMATION

This chapter explains the mounting location, the meaning of lamp indications, and the switch settings of each Q-SIG circuit card.